Y81-315T全自動金屬液壓打包機
金屬壓塊機（廢舊金屬壓縮機）的詳細介紹
全自動金屬液壓打包機適用于煉鋼廠,回收加工行業及有色、黑色金屬冶煉行業.將各種金屬料、鋼刨花、廢鋼、廢鐵、廢鋁等擠壓成長方形、正方形等各種形狀的合格爐料，以降低運輸和冶煉成本。
特點：各種機型均采用液壓驅動，可選擇手動或PLC自動控制操作。
安裝無須底腳螺絲，要求≥100mm厚，而且平整結實的混泥土地面作安裝面。
機體均采用上等碳素結構鋼焊制,壓縮室及前方進料閘門附加耐磨鋼板確保經久耐用.
上合壓板與機體上周邊安裝可換式裁刀。(V型SKD-11耐磨鋼刀)出包有翻包，前出包，推包三種形式。擠出壓力從150噸至1000噸有等級，生產率0.5噸/小時至40噸/小時.
加料箱尺寸和包塊形狀尺寸可根據及戶原料規格設計定制.
Y81-315噸金屬打包機型系列打包機
型號：Y81-315噸金屬打包機
公稱壓力主缸
KN：3150
側缸KN：1500*2支
液體*大工作壓力
MPa:31.5
料箱尺寸長2000mm,寬1750mm,高:950mm
包塊尺寸:長（600-1400）mm*寬:500 *高:500mm
包塊密度kg/m3：≥2200
單次循環時間S：90
電機功率KW：22+30
油泵YCY：160+250
機器外形尺寸mm：長6000*寬4200*高3000。
整機重量t；26.
全自動金屬液壓打包機可將各種金屬?gòu)U料（邊角料、刨花、廢鋼、廢鋁、廢銅、廢不銹鋼、報廢汽車等）擠壓成長方體、八角形體、圓柱體等各種形狀的合格爐料，既可降低運輸和冶煉成本，又可提高投爐速度。該系列打包機主要適用于鋼廠、回收行業，以及有色、黑色金屬冶煉行業。
全自動金屬液壓打包機產品特點
① 所有機型采用液壓驅動，可選擇手動操作或PLC自動控制。
② 出包方式有機械手出包、翻包、側推包、前推包、人工取包等。
③ 多款機型可供選擇：不同壓力、料箱尺寸、包塊尺寸形狀。
參數數據由：深圳市達安泰機械設備有限公司提供

Y81-315T automatic metal hydraulic baler
Metal briquetting machine (scrap metal compressor) in detail
Metal hydraulic baler for steelmaking, recycling processing industry and nonferrous metals, ferrous metal smelting industry. All kinds of metal materials, steel shavings, scrap, scrap metal, scrap aluminum and other extruded into a square, square and other shapes of qualified Charge to reduce transportation and smelting costs.
Features: A variety of models are used hydraulic drive, you can choose manual or PLC automatic control operation.
Installation without foot screws, requiring ≥ 100mm thick, and the formation of solid concrete ground surface for the installation surface.
The body is made of high quality carbon structural steel welding, compression chamber and front feed gate additional wear-resistant steel plate to ensure durable.
On the upper plate and the body on the installation of interchangeable cutting knife. (V-SKD-11 wear-resistant steel knife) out of the package package, before the package, push the package in three forms. Extrusion pressure from 150 tons to 1,000 tons of grade, the productivity of 0.5 tons / hour to 40 tons / hour.
The size of the tank and the size of the package can be customized according to the specifications of the household.
Y81-315 tons of metal packaging machine series Da Baoji
Model: Y81-315 tons of metal balers
Nominal pressure master cylinder
KN: 3150
Side cylinder KN: 1500 * 2 support
Liquid maximum working pressure
MPa: 31.5
Box size is 2000mm long, 1750mm wide, high: 950mm
Package Size: Long (600-1400) mm * Width: 500 * Height: 500mm
Bulk density kg / m3: ≥2200
Single cycle time S: 90
Motor power KW: 22 + 30
Oil pump YCY: 160 + 250
Machine dimensions mm: length 6000 * width 4200 * high 3000.
Weight of the whole machine;
Metal balers can be a variety of metal scrap (scrap, shavings, scrap, scrap aluminum, scrap copper, waste stainless steel, scrap cars, etc.) extrusion box, octagonal body, cylinder and other shapes of qualified charge, can reduce Transportation and smelting costs, but also improve the speed of casting furnace. The series of balers are mainly used in steel mills, recycling industry, as well as nonferrous metals, ferrous metal smelting industry.
Features
① all models using hydraulic drive, you can choose manual operation or PLC automatic control.
② out of the package by a robot out of the package, turn the package, push the package, the former push the package, such as artificial package.
③ variety of models to choose from: different pressure, the size of the box, mass size package.
Parameter data from: Shenzhen City, Antai Tai Machinery Co., Ltd. to provide